Ideal Motion is a leading supplier of carton flow rack.

Home

Products

Online Catalog

Contact Us

FAQ

Selective Pallet Rack

Push Back Rack

Carton Flow Rack

Pallet Flow Rack

Cantilever Rack

Pallet rack installation and reconfiguration services

Installation & Reconfiguration Services

Pick modules

Pick Modules

Wire Mesh Deck

Pallet rack accessories

Rack Accessories

Carton Flow Rack:

Span-Track Can be Added to Any New or Existing Pallet Rack. No Shelves or Intermediate Support Required.

• Fits Any Rack.

• No Shelves Needed.

Super Flexibility - Simply pick up track to easily rearrange/reslot Span-Track to match SKU's.

High Capacity, High Durability - Span-Track takes the abuse of active warehouses and assembly plants. Galvanized steel side channels, 3/4" diameter tempered aluminum full width rollers and full length 3/16" steel axles handle loads up to 50 lbs. per ft.

Unrivaled Flow - Full-width rollers for total carton support - 300% more product contact than plastic wheel - eliminate hang-ups, increase throughput. Economical

• Installs in 1/3 the time of wheel tracks

• Longer useful life

• No replacement cost

Low Profile Span-Track:

Nests Between Beams: Low Profile installs between beams for full use of vertical space. Fits any pallet rack -- available in "to-the-inch" cut lengths. Drop-in design is easy to add to existing rack or to reslot without tools. Place Span-Track Hangers on front and rear beams to support each Low Profile track. Hangers available for all beam types. Hangers include built-in label holder, labels and end caps.

Adding Track:

Adding Span Track requires no tools. Rollers at front of track are lower than top of beam, which acts as a carton stop. Full-width Rollers Available with 1", 2", or 3" roller spacing

*Standard Low Profile over 10' requires an Intermediate beam, creating two unsupported spans - the longer of the two dictates capacity.

Span-Track 3D:

Span-Track 3D for Heavier Loads on Unsupported Spans Low Profile Span-Track 3D with 3" deep side channels (14 gauge galvanized steel) carries loads up to 50 lbs. per ft. on 10' unsupported spans. Span-Track 3D installs between pallet rack beams. Saves vertical space for high density live storage. Order "to-the-inch" cuts to fit existing footprint. Uses two standard Span-Track Hangers per 3D section.

Low Profile Knuckle:

Each-Pick Made Easy Low Profile Knuckle takes the best of Low Profile Span-Track and adds a 20" angle to improve visibility, access, and accuracy at the pick point. The track does it all without altering or adding to rack structure and without consuming precious aisle space. Low Profile Knuckle comes in 9", 12", and 15" track widths. Knuckle Lengths: 12", 16" 20" and 24". Track lengths, load capacities, construction and installation identical to standard Low Profile. Conquer Space - Track Sits Entirely Between Beams Slow Down Plate: Plate snaps onto rollers to reduce product speed and back pressure at any point along track. Can be used as impact plate at load end.

High Profile Span-Track:

High Profile installs on any pallet rack beam. Track fully adjustable left, right, front and back--providing complete flexibility to re-profile carton flow to match SKU's.

Locks Onto Beam 14 ga. galvanized retainer angle attaches to full-length of front and rear beams. Lock arm secures Span-Track to the rear beam retainer angle and rack. Simple lock/unlock action enables one person to easily adjust or relocate track without tools. Built-In Functionality Front and Rear End Features: Front end of High Profile Span-Track acts as a raised carton stop. Rear end has a load bar to absorb Impact loading. Both ends have 2" label holders built-in. Flush vs. Overhang vs. Contour Track can overhang rack at front and rear. Pick face profile can be straight or contoured. Most full case picks use a straight face. Loose picks use a contoured face--a layback design with a stepped effect--which optimizes products visibility and access.

Deck Span-Track:

Drops Between Beams Deck Span-Track drops onto the beams of your existing pallet rack for instant, ready-to-roll live storage. NO shelves, hangers, or retainers. Adjust beams and add track. One worker, NO tools, and NO complications. . Cartons Always Flow to Front Push back design provides easy loading--keeps cartons on track, up front and easy to retrieve. It's the Unrivaled Ergonomic Choice Maximizes Density Push back design provides easy loading--keeps cartons on track, up front and easy to retrieve. Full-Width Rollers 3/4" diameter aluminum rollers with galvanized steel axles. Available Widths: 6", 9", 12", and 15" with Roller Spacing: 1", 2", or 3" on center. Capacity and Lengths Deck Span-Track available in 36", 42", 44", 44", 48", 54", and 60" Lengths to match depth of standard uprights. Load capacity is 50 lbs./ft.

Track Length: ShelfTRACK sections are available in "to-the-inch" cut lengths from 3’ to 12’. To determine track length required, measure the length of the plastic wheel lanes to be replaced or measure the clear distance between the inside of the shelf's back angle and the inside of the front angle. Sections can be spliced end-to-end to create longer runs. Track Width: Available 6", 9", 12" and 15" wide. Cartons may be wider than track section. Roller Centers: Cartons with firm flat bottoms flow well when supported by four rollers. Imperfect bottoms or heavy weights may require closer roller spacing. Pitch: Recommended pitch is 1" per ft. Test for product flow. Guide Rails: ShelfTRACK does not require guide rails, but they can be left in place if desired.

Ideal Motion is a material handling, engineering, and industrial supply company. We provide manufacturing, distribution, and warehouse automation, specializing in engineered conveyor systems, pallet racking, storage solutions, and modular building systems. We have direct access to a crew of over 30 professional mechanical installers, experienced with pallet rack and storage system installation and reconfiguration.

Ideal Motion offers a broad selection of pallet racking, shelving, and engineered storage solutions. We represent leading pallet rack manufacturers. Ideal Motion specializes in storage solutions for warehouse, distribution, and manufacturing facilities with selective rack, push back rack, carton flow rack, pallet rack, cantilever rack, pick modules, drive-in / drive-thru rack, wire mesh decking and professional installation.

Industrial Supplies

Bins Cabinets Carts Casters Chairs & Stools Cleaners / Wipes Containers Conveyors Cranes Desks / Tables Dock Equipment Dollies Drums & Equipment Fans Hoists & Equipment Hoppers Hose & Cord Reels Ladders Lifts / Lifting Equipment Lockers Matting Pallets & Equipment Partitions & Barriers Rack Systems Safety Equipment Scales Security Equipment Shelving Shipping Supplies Strapping Trucks / Hand Trucks Warehouse Equipment Wire Work Benches

Conveyor Systems

Modular Building Systems

Online Catalog

Top of Page